Radius targeting for gym ads: the 12-15 minute rule
Geographic radius is the most important targeting decision a local gym makes, ahead of the endless debate about broad vs interest audiences and everything else Meta lets you touch. And the right unit isn't kilometres: it's minutes. People don't cross the city to work out; your real market is whoever lives or works within 12-15 minutes of your door. In a dense city centre that's 2-3 km on foot. In a rural area where everyone drives, 10-15 km. The same number of kilometres defines two completely different businesses depending on where the gym is.
This conflicts with how the tool is designed. Meta asks for a radius in kilometres and shows you a reach number that grows as you expand it. Every part of the panel pushes you toward a bigger radius. This article is about resisting that push with your own data.
The 12-15 minute rule
Working out is a 2-4 times per week habit. A restaurant can survive on occasional visits from 30 minutes away; a gym can't, because nobody sustains 50 minutes of round-trip travel three times a week for months. Retention studies in the industry and the data from any management software point to the same thing: the vast majority of members who renew live or work within 15 minutes of the gym.
The implication for your ads is direct. The lead who's 25 minutes away can fill in your form (the form costs them two clicks), they might even come in for a visit. But the probability of them joining is a fraction of what it is for the lead 8 minutes away, and the probability of them renewing at 6 months is lower still. Paying for that lead is paying for an almost-customer.
Converting minutes to kilometres by environment:
- Dense city centre (London, Madrid, urban core): people walk or take public transport. 12-15 minutes means 1.5-3 km.
- Mid-size city or residential neighbourhood: mix of walking and driving. 3-5 km.
- Suburban with car: 5-8 km.
- Rural area or regional town: everything by car, little competition. 10-15 km, sometimes more if you're the only box within 30 km.
These ranges are a starting point, not the answer. The answer is in your own data.
Your real radius is already in your management software
You have the market research done and you haven't looked at it: the postcodes of your current members. The homemade heat map takes 20 minutes:
- Export your active members from your management software with their postcode (a standard field in almost all of them).
- In a spreadsheet, count members by postcode and sort from highest to lowest.
- Plot the 5-8 postcodes with the most members on a map (Google My Maps works, it's free).
- Look at where 80% of your members are concentrated and how many minutes from your door the edge of that cluster sits.
That's your real radius. Not the one you'd like to have: the one your market has already shown you exists. If 80% of your members live in 4 postcodes that fit within 2.5 km, advertising to 8 km is theory against evidence.
The exercise usually throws up two surprises. The first: the cluster is almost never a circle, a train line, a river or a major road cuts the flow on one side, and the cluster stretches toward wherever travel is comfortable. The second: a strong postcode far from the gym, which is almost always the office area where your members work. Note that second surprise, it has its own move further down.
Radius, postcode or multiple pins: when to use each
Meta offers three ways to draw your area, and they're not interchangeable.
| Method | How it works | When to use it |
|---|---|---|
| Radius from a pin | Circle of 1-80 km around a point | The right default for 80% of gyms. Simple and sufficient |
| Postcodes | List of included postcodes | When your real cluster isn't a circle: physical barriers, elongated cluster, or you want to exclude specific zones within the circle |
| Multiple pins | Several pins with a small radius each | Non-contiguous zones: your neighbourhood + the office area, or a gym between two population centres |
Simple radius wins by default because it gives Meta a contiguous, easy-to-optimise audience. Switch to postcodes only when the heat map has shown you that the circle is lying: for example, a gym next to a river with 90% of its members on one bank shouldn't be paying for impressions on the other, even though it's only 800 metres away.
The double-pin trick deserves its own paragraph: one pin on your gym and another on the office district or business park where your neighbourhood works. The person who works 5 minutes from your gym is a potential member even if they live 20 km away, because they'll train at lunch or after work. If your heat map from the previous step showed that office cluster, this is its ad: a lunchtime or 6pm offer, pin of 1-2 km over the work area. Works especially well combined with B2B deals. Technical note: Meta targets "people who live or have recently been" in the area by default, which already captures workers; the explicit pin also lets you tailor the message to them.
Exclusions: the area that doesn't work for you
Targeting also means deciding where not to advertise, and Meta lets you exclude zones within your radius.
The typical case: you're a boutique studio at €89/month and 1 km away there's a low-cost gym at €19.99. A 3 km radius pulls the low-cost's direct catchment area into your audience. Some of those residents are already members there, or chose their neighbourhood and gym with price in mind. Not all of them, obviously, and the person switching from an overcrowded low-cost to a boutique is a great member. But as a population, that zone converts worse at your price, and if your CPL is running high against benchmarks, excluding the kilometre around the cheap competitor is one of the quickest tests you can run.
The other exclusion, which isn't geographic but matters more: your current members as an excluded custom audience. In a neighbourhood-scale audience they might be 1-2% of reach, all paid impressions that can't convert. This is covered in the hub levers and I'm flagging it here because geographic exclusion without member exclusion is building the house starting with the roof.
The oversized radius mistake
"I'll set 15 km to reach more people" is the number one geographic error, and the maths of why it's expensive is worth doing once with real numbers.
Suppose a CPL of €9 and two leads. Lead A lives 8 minutes away: converts at a high rate, let's say 20%. Cost per join: €45. Lead B lives 25 minutes away: their real conversion is closer to 4-5%, because the form cost them two clicks but getting there three times a week is a different story. Cost per join: €180-225. Same CPL in the dashboard, four or five times more expensive on the only metric that pays bills. And the damage doesn't stop there: if they sign up as an exception, the member who's 25 minutes away is the first to stop coming in February and not renew.
The oversized radius also has an invisible cost: it pollutes the signal. Meta optimises toward the cheap lead, and cheap leads are plentiful in the outer ring where no one else is bidding on them. The more you expand, the more you train the algorithm to bring you exactly the lead you don't want. That's why this hub insists on never surrendering geography to automation: Advantage+ without a geographic cap will find you incredibly cheap leads at 40 km with zero members among them.
When should you actually expand? When you've genuinely hit a ceiling: frequency spiking with fresh creatives, CPL rising consistently, and your current audience fully exploited. Even then, expand kilometre by kilometre measuring the conversion-to-join of each new ring, not all at once.
Density beats size
The principle that orders everything above: 5 km well worked beats 15 km diluted. With the same budget, the smaller radius concentrates impressions on the population that can actually buy from you, makes you omnipresent in your neighbourhood (which in local is a real brand advantage: "I see you everywhere" is something regular visitors say) and gives Meta a clean signal to optimise against.
Starting table by gym type and environment, to adjust with your heat map:
| Gym type | Dense city | Mid-size city / residential | Rural / out-of-town |
|---|---|---|---|
| Low-cost / 24h | 2-3 km | 4-6 km | 10-15 km |
| Traditional neighbourhood gym | 1.5-2.5 km | 3-5 km | 8-12 km |
| CrossFit box / functional | 3-4 km | 5-8 km | 12-20 km |
| Boutique studio (Pilates, yoga, EMS) | 1.5-3 km | 3-5 km | 8-10 km |
| Women-only / specific niche | 2-4 km | 5-8 km | 12-15 km |
Niches can handle bigger radii because specialisation compensates for travel: someone who specifically wants CrossFit will drive 18 minutes; someone who wants "a gym" has three closer options. Low-cost competes on price and convenience, so its useful radius is the shortest in its column as soon as there's any competition.
Set the radius once, with data, and leave it alone
The full process fits in an afternoon: pull the member heat map from your management software, set the radius where 80% live (correcting with postcodes if the cluster isn't round), add the work-area pin if it exists, exclude current members and the zones that don't convert at your price. Then don't touch it: every geographic change restarts the learning phase, and a well-set geography doesn't expire the way creatives do.
If you're building the campaign from scratch, this is a chapter in the complete guide to Facebook Ads for gyms, and radius is the first thing I'd set before thinking about audiences or ads. It's also one of the few things an automated system shouldn't decide for you without your data: when we set up campaigns in Pilotium, the catchment area comes from analysis of the club's actual location, because the 12-15 minute rule has no exceptions that an algorithm can guess. You know your neighbourhood. Everything else is execution.